Home cars Best Car Amplifier in 2023

Best Car Amplifier in 2023

31
0

Looking for the best car amplifier on the market? Well, to help you pinpoint which amp is right for your goals, here’s a run-down of some of our favorites.

Adding a dedicated power amplifier is the ‘big step’ when it comes to upgrading your car audio, alongside a subwoofer. Before getting to that stage, most of us will seek ever yet more powerful head units with higher wattage ratings. The maximum for a car radio is normally 4x50W, which equates to just 23 watts of RMS power or ‘Root Mean Square’. Sony have an output stage with a tiny 4×100 watts Class D in one of their head units, but to add real power to your sounds, you’ll need a dedicated amplifier. But which one?

How to buy the best car amplifier

The important stuff to consider is this: check out the power, the current draw, the sound quality, and then finally the available features; prioritized in that order.

Overall, the fairest way to rate amplifier power is RMS. Music is dynamic – it gets louder and quieter – thus true output of an amp can be hard to measure. The ‘peak’ ratings on amplifiers vary absurdly. There is a nasty cluster of fake products that look like real car amplifiers but are made to scam you. If it looks like too many watts for the money, it will be junk. Next, you need to know if you have the margin on your alternator to run the amplifier. Your ‘margin’ is the alternator’s ampere output above what your car needs to run its own accessories. The current draw may be too high for your car without upgrading your alternator or adding a deep cycle battery.

Signal to Noise ratio is how ‘hi’ your ‘fi’ goes. Less important for bass, it’s rated in decibels. Alternatively, sometimes a rating for S/N/R is avoided in favor of a distortion rating. Where 89dB is good, anything at 100dB is damn fine and above that is where it can get posh and expensive!

Lastly, check out the features. Does it have crossovers? Or filters? Or other stuff you like? Now that we’ve got the groundwork covered, let’s dive straight into it. Here’s some of the best car amplifier options that you can buy today.

Best Two/Four Channel Amplifiers

Alpine BBX F-1200 four channel

Better quality two (and multi) channel amplifiers can be ‘bridged’. This is when you connect one speaker wire to one channel (+) and the other to the paired channels (-). The use of a bridging switch is common but sometimes just hooking it up that way will work. It’s a way to suck more power, get better grip of the speakers and get more features for your money. We recommend you go straight for a four channel amplifier for more versatility, and it’ll be easier to resell if you upgrade in the future.

This Alpine amp is a Class A/B MOSFET design and represents amazing value for money. You get great fidelity and some real muscle for a low price from a top brand.

Tech Specs:

Power Output: 4ohms 4 x 50W, 2ohms 4 x 70W, Bridged 4ohms 2 x 130W
Current Draw/Fuse Rating: 40A
Signal To Noise Ratio: 95 dB
Features Rich? 50Hz – 500Hz highpass and lowpass filters and a 45Hz Bass EQ

Rockford Fosgate Power T-400 four channel

A serious slab of Americana, this amp has the famed Rockford PUNCH EQ. You can boost the sound at 12kHz and at 45Hz up to a whopping 18dB, making its audio output even fatter and ‘beatier’ – great if you want some real thump and zing in your tunes. This amp is arguably less beloved of the fancy fidelity types, but is adored by the power hungry. There are two sets of crossovers, (up/down on each pair of channels) which is twice those of Alpine’s BBX, making the Rockford more versatile.

Another Class A/B MOSFET design, Rockford Fosgate has a cluster of technologies that they have been developing for decades just for car amps. This one truly rocks and will hold its value.

Tech Specs:

Power Output: 4ohms 4 x 60W, 2ohms 4 x 100W, Bridged 4ohms 2 x 200W
Current Draw/Fuse Rating: 60A
Signal To Noise Ratio: RF quote less than 1% THD or Total Harmonic Distortion
Features Rich? It has two sets of high and lowpass crossovers, and its own Punch EQ

JL Audio HD600/4 four channel

The HD600/4 has what JL calls ‘Single Cycle Control Switching’. Essentially, it’s a way of tightly regulating the power supply to the amplifier. A very high fidelity amp, it outputs the same 4×150 wattage at a wide range of impedance of load. So, the 2ohm and 4ohm ratings are the same. The resulting sound quality is amazing, hence why this is one of the pricier options.

Described as having huge dynamics and astonishing resolution, JL dare you to compare it to any rival. In fact, JL are so good at high end amps that Alpine have been known to use them as performance comparison benchmarks. The HD600/4 is a full range Class D design.

Tech Specs:

Power Output: 4ohms 4 x 150W, 2ohms 4 x 150W, Bridged 4ohms 2 x300W
Current Draw/Fuse Rating: 50A
Signal To Noise Ratio: >110 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Features Rich? Remote level control and pre-outs but the quality is the main feature

Best Multi-Channel Car Amplifiers

JBL Club A5055 five channel

Like the Rockford Fosgate T-400, this has big 4 gauge power wire terminals to deliver serious current. A fifty watter (65w at 2 ohm loads) with a decently large half-kilowatt bass amp section, this one amplifier can power a whole system. The unit’s crossovers span 32Hz to 320Hz for the main channels and there’s another the same, for the bass one. There is a bass boost set at 45Hz that you can lift by as much as 12dB.

The main four channels are Class A/B and the subwoofer channel is Class D – cunning use of technology to keep the price keen. In conclusion, this is a great little unit for taking decent speakers to a whole new level.

Tech Specs:

Power Output: 4ohms 4 x 50W + 1 x 320w, 2ohms 4 x 65W + 1 x 500w
Current Draw/Fuse Rating: 3 x 30A fuses – BIG power at 90A
Signal To Noise Ratio: Balanced Differential inputs cited but no figures quoted
Features Rich? Comes with a remote level control knob. Crossover and bass boost.

Hertz HCP5D five channel

This is a hi-fi item. The HCP5D has a trio of both high level speaker input sockets and paired RCA inputs for signal level. There is a button so you can run it through three channels with two high power mains and the sub bass. One high end feature is the switchable subsonic filter fixed at 25Hz. Unless you are playing organ music or bass tunes, your power will not be needed down this deep. So, the filter stops the deep harmonics from going through the amp and using up the power where you cannot hear it. This serves to leave more oomph for the stuff you can actually feel.

The bass boost is at 50Hz and can be turned up by as much as 12dB. Also, there is an optional wired remote subwoofer level knob available. A very high quality single-box solution.

Tech Spec:

Power Output: 4ohms 4 x 55W + 1 x 160w, 2ohms 4 x 90W + 1 x 280w
Current Draw/Fuse Rating: 30A
Signal To Noise Ratio: 100dB
Features Rich? Yes! High pass, low pass and even band pass crossovers

Audio Control LC-6.1200 6/5/4/3/2 channels

AudioControl call this the most flexible 6 channel amplifier on the market. As well as all the preamp inputs it has two sets of assignable preamp outputs. This means you can do all sorts of things up to and including running it fully active. It can run a high end set of three way component speakers and still feed signals onwards. The crossovers are sophisticated Linkwitz-Riley designs (meaning better than cheap ones) and there is a mass of controls on the top panel to sort all this out. As such it is a bit of an expert product to install.

The power draw is hefty as this really makes some watts. AudioControl are the company that makes the Epicenter bass synthesizer, so they know their lows. It means they know about the power the lows need, too. A totally top end amplifier. Buy it here.

Tech Specs:

Power Output:4ohms 6 x 125W, 2ohms 6 x 200w
Current Draw/Fuse Rating: 3 x 40A
Signal To Noise Ratio: 103dB
Features Rich? Incredible, with proprietary AccuBASS® bass tech

Best Single Channel Amplifiers

BOSS R2400D single channel

An inexpensive brand, this mono bass amp has some serious features. The maddest is that it is strappable, meaning you can use two to drive one huge power output. ‘Strapped’ power, bridging two R2400D at 2ohms, to show one ohm to each amplifier, claims an output of 4,800 watts. Though, most consider that number as a bit overstated. The low pass crossover is settable from 50Hz to 150Hz, and the subsonic filter is variable between 15Hz and 40Hz. This is a brilliant feature and allows you to play deep but without the crippling ultra lows sucking your power.

A Class D MOSFET design, there is a switchable phase control and the case has a groovy backlit logo. An awful lot of product and power for the money. You get a wired remote control and a special strapping ‘data link’ cable with it.

Tech Spec:

Power Output: 4ohms, 1 x 450W, 2ohms 1 x 900W, 1ohm, 1 x 1800W
Current Draw/Fuse Rating: 2 x 35A
Signal To Noise Ratio:100dB
Features Rich? For the price, this has bass boost, a crossover, a subsonic filter and more. Buy it here.

JBL GTR-1001 single channel

The JBL GTR-1001 is a mighty Class D bass amplifier with a 2,600 watt peak rating. That means a true kilowatt RMS as the main oomph. This will require a secondary battery and ideally an uprated alternator on your car. The power of JBL big amps is legendary and this is an amazing amount of power for the money. In the old days a quid a watt for big amps was seen as good. Now, that is old fashioned as you can get a thousand watter for way under £500.

The GTR-1001’s lowish signal to noise ratio is irrelevant for huge bass. Meanwhile, this amp is the bass brother of other GTR models with incredible features. Any passenger may play their music into your system via the Bluetooth sections on the other JBL GTR amps. Deeply clever, deeply cool, hugely potent, great value for money. Buy it here.

Tech Spec:

Power Output: 4ohms, 1 x 700W, 2ohms 1 x 1,000W
Current Draw/Fuse Rating:3 x 35A
Signal To Noise Ratio: >80dB
Features Rich? Gain, frequency of crossover, bass boost and phase are the lot

Vibe BLACKDEATH M21K-V6 single channel

For the lunatic bass heads, the Vibe people go all the way. With absurd monster subwoofers to hang on them, this is their Korean-built bass monster. You could spend more with USA-made exotica and these mono monsters can get really crazy. This one is almost ‘normal’ by comparison to some. Able to drive huge speakers to ground shaking levels, this is the sort of thing bass competition systems need.

Incredibly, this is seen as good value for the true bass head’s spend. Amazingly enough, it also happens to be a sweet sounding ‘Ultra’ Class D amp. It can play full range if your speakers are big enough to cope. This can drive full-on public address systems and get you kicked out of car shows for drowning out the show P.A. Buy it here.

Tech Spec:

Power Output: 4ohms, 1 x 3,470W, 2ohms 1 x 7,200W, 1ohm, 1 x 10,500W
Current Draw/Fuse Rating: 1,000A
Signal To Noise Ratio: 90dB
Features Rich? Low pass/High pass crossover 10Hz to 15kHz

How were the best car amplifiers chosen?

Adam Rayner has recommended the best car amplifiers based off his expertise as an audio specialist. Adam started off his career working with bands before physically building speakers for a manufacturer. From here, Adam starting reviewing products, from in-home theaters to the wildest in-car entertainment setups on the planet. His abilities to spot seemingly tiny differences in audio sets him apart when it comes to identifying the very best products at the best prices. Adam has used his expertise to create the above list based on his previous experience with those products alongside the tech spec.

Relevant content: 

Car Amplifier Guide
Best Two Channel Amplifier
Best Four Channel Amplifier

The post Best Car Amplifier in 2023 appeared first on Fast Car.

Previous articleChemical Guys Chenille Microfiber Premium Scratch-Free Wash Mitt Review
Next articleWhat Is Car Detailing?